####
      ##  ##
     ###    =============================================================
     ####   K Y P I X   C O M M A N D S
      ### ===============================================================
  ##  ##
  ####

SkyPix is defined as a sub-set of the ANSI standard, and in fact most ANSI
commands have the same effect in SkyPix mode.  There are however several
SkyPix-specific commands (each followed with a characteristic "!" [bang]
terminator) which can only be used from a terminal equipped to emulate the
SkyPix protocol (all 2 of 'em ;)

NOTES:
------
· All SkyPix graphics are implemented on a default screen of 640x200
  (8 colours) with the default palette described below (unless the palette
  or number of number of bitplanes is changed.)

· All sequences should be entered WITHOUT SPACES - the spaces are included
  for readability only.

Commands:
 1 - SET PIXEL            9 - PLAY SAMPLE         16 - XMODEM TRANSFER    
 2 - DRAW LINE           10 - SET FONT            17 - SET DISPLAY MODE   
 3 - AREA FILL           11 - NEW PALETTE         18 - SET PEN B COLOUR   
 4 - RECTANGLE FILL      12 - RESET PALETTE       19 - POSITION CURSOR    
 5 - ELLIPSE             13 - FILLED ELLIPSE      20 - (NOT IMPLEMENTED)
 6 - GRAB BRUSH          14 - DELAY (PAUSE)       21 - CONTROLLER RETURN  
 7 - USE BRUSH (BLIT)    15 - SET PEN A COLOUR    22 - DEFINE GADGET      
 8 - MOVE PEN           

        Next Section                                Table of Contents  

Converted on 22 Aug 1996 with RexxDoesAmigaGuide2HTML by Michael Ranner.